Category: UPS accessory / Model Name: NetProbe Lite

Model Number: NET-01
     Download Brochure
Check Alarm Code
 Features
  - Connects sensors devices to 10/100Base-T Ethernet network
  - Build in a temperature and a humidity sensor
  - Temperature detection between -40C to 100C
  - Humidity detection between RH 0% to 100%
  - Support 8 channels for Voltage input or 4 channels dry contact input
  - 0V ~ 4.095V detection range in 8 bit/10 bit/12 bit resolution
  - Voltage difference mode: Voltage difference detection of Sig-1 ~ Sig-2 and so on.
  - Individual voltage mode, votage detection of Sig-1 ~ Sig-8
  - Show IP address, status, Data on the LCD display
  - PPPoE and DDNS protocol for xDSL connection to broadband network
  - Configuration via Telnet, Web or Netility software
  - Supports PDA, GPRS, WAP for GSM Phone
 

Product Descriptions

Many kind of equipments and devices uses dry contact output to send alarm signal to remote panels, and some of them could even send DC analogy to remote monitoring and manage systems. Communicating the status of these dry contact systems or collecting these DC analogy data is important in a complex enterprise network. NetProbe Lite is the smallest, lightest and fastest sensor collector in the world. It is a Web based and SNMP enabled device that could monitor the environment conditions with low cost. Moreover, NetProbe Lite only weights 75g, but has the heart of 32bit RISC ARM7. In addition, it also supports varies TCP/IP protocols such as SNMP, SNTP, PPPoE. Dynamic DNS, SNTP, BootP, DHCP and so on and forth.NetProbe Lite is a very useful device for the user to read data by either from the LCD display that shows the IP address, Subnet Mask, Gateway, Status or Voltage of individual channel sequentially or the user could watch the data and status on PDA or GSM phone via GPRS/WAP. Further, it is a user-friendly Web inter- face that allows the user to monitor and control remotely. it could monitors the environmental variations and then notifies the user through Email SMS or sent SNMP TRAPS to the Network Management System.